• 300 kW University of Launceston.
2 x 150 kW Power HT's.
The plant is installed with a RVA47 sequence controller which is controlled by the building management system.
The system is has been designed to operate at maximum efficiency, with floor heating and over sized fancoils for air handling, operating at 50 deg. C..

Download system design schematic

• 450 kW Monash University, Caulfield campus.
This change over went with out a hitch. The old boiler has been pushed a side for later removal
3 x 150 kW Power HT's.
The plant is installed with RVA47 sequence controller, which is controlled by the building management system.

Download system design schematic

• 450 kW UPGRADE AT UNIVERSITY OF BALLARAT
This new plant at the University of Ballarat Student Accomodation building is prioviding domestic hot water and heating to the 35 year old building. The 3 x 150 kW Power HT and once again an RVA 47 cascade sequence controller is controlling the system. An outdoor sensor is providing us with the information to outside compensate the heating system. The RVA 47 will give priority to the domestic hot water system when required.

Download system design schematic

• 1500 kW 188 Collins st Hobart, Tasmania.
We now have 2 large plants commissioned at the very bottom of Australia.
Plant 1 on the small tower has a 600 kW plant, 4 x 150 kW Power HT's.
Plant 2 on the larger tower has a 900 kW plant, 6 x 150 kW power HT's.
The 2 plants are installed with RVA47 sequence controllers which are controlled by the building management system.

Download system design schematic

• HYDROHEAT GOLF DAY
What a Winter blast in December, the boys still played on, rain, wind and more rain.
From left Ken and Peter (Hydroheat), Chris (Ascot Heating) and Darren (Melbourne Hydronics).
Congratulations to Chris from Ascot Heating with a score of 84.

• BAXI TRAINING @ HYDROHEAT NOVEMBER 24, 2010
Thank you to John McCarthy and Samuele Nichele on their informative visit to Australia and Hydroheat.
Thank you to the consultants and installation contractors that attended and we hope that the information gathered will aid in future installation of Baxi boilers.

Download BAXI presentation

• HYDROHEATS NEW TRAINING FACILITY
We are proud to announce that our new training area is now commissioned and ready for training.

• PRODUCTS AVAILABLE:
Luna 3 310 Comfort combination boiler.
Luna 3 330 Comfort HT combination boiler.
2 x Luna HT 1450 condensing boilers manifolded and sequence controlled. (See a Hydraulic seperator working)
• TRAINING OFFERED:
Gas commissioning and servicing, Luna 3 Comfort combination boiler.
Gas commissioning / combustion test and servicing, Luna 3 Comfort HT combination boiler.
Gas commissioning / combustion test, servicing and commissioning RVA47 sequence controller.

• E-MAIL OR CALL US, TO ARRANGE AN APPOINTMENT.

info@hydroheat.com.au

Phone:03 9588 1299

• BAXI CONDENSING BOILERS AROUND THE WORLD
North America

• 45 kW BAXI LUNA HT, LORETO COLLEGE CHAPEL BALLARAT
Loreto college chapel has been cold in winter for 130 years. The new heating system was installed by Paul Turner Plumbing of Ballarat, church services at the chapel will never be cold again. The chapel is Heritage listed so minimum modifications have been made to the building to add the new heating system. The radiators are installed on pedestal brackets and the boiler is mounted on a frame. The chapel is heat to 17.5 deg C. and the humidity has dropped from 93% to 52% aiding in preserving the old pipe organ and painted wall decorations. the system is controlled with a Honeywell CM907 thermostat with a remote sensor.

P. S. Thanks to Mick for all the laughs on commissioning day.

• 170 kW BAXI POWER HT, MC CLELLAND GALLERY LANGWARRIN
2 x 85 kW Baxi Power HT boilers. The system is controlled with a Baxi RVA 47 sequence controller linked with the existing Building managment system. The 0-10 volt control drives the boilers and sets the delivery temperature.

Download system design schematic

• 300 kW BAXI LUNA HT, LATROBE UNIVERSITY SHEPPARTON CAMPUS
3 x 100 kW Baxi Luna HT wall mounted boilers. The system is controlled with a Baxi RVA 47 sequence controller linked with the building managment system. The flues are manifolded with shutter kits on each boiler. The wall hung boilers and pipe manifold kit, supplied by Baxi made for a very tight plant room.

Download system design schematic

• 600 kW PLANT, NURSING HOME MOOROOLBARK
An excellent installation by GMR mechanical from Melbourne. The heating plant has 3 x 120 kW Baxi Power HT boilers with RVA 47 sequence controller and the DHW plant has 2 x 120 kW Baxi Power HT feeding 2 calorifiers. The flue system couples up all 5 boilers into one common flue. The flue manifold system is all polypropylene plastic with stainless steel riser. Each boiler has a flue shutter kit which prevents flue gasses from spilling into non operating boilers and plant room.

• 300 kW PLANT, OLD TREASURY BUILDING MELBOURNE
The Old Melbourne Treasury building built 1857-1862 has had a boiler upgrade in September 2010. An excellent installation by A. G. Coombs Service Melbourne. The heating plant has 2 x 150 kW Baxi Power HT boilers with RVA 47 sequence controller. The flue system couples up the 2 boilers into one common flue. The flue manifold system is all polypropylene plastic with stainless steel riser. Each boiler has a flue shutter kit which prevents flue gasses from spilling into non operating boilers and plant room. The condensate is all treated and then sent to the sewer via a condensate treatment tank.

Download system design schematic

• ROYAL MELBOURNE INTITUTE OF TECHNOLOGY (RMIT) TRAINING FACILITY
RMIT Melbourne has just installed an 85 kW Baxi Power HT, Zenitherm radiators Grundfos pumps for students training with the latest high efficiency technology.

• 300 kW BAXI PLANT OFFICE BLOCK 4 MORT STREET CANBERRA
This is a fantastic installation 3 X 100 kW power HT with RVA47 cascade controller.
The system is an existing air handling system which has been upgraded to operate with new heating hot water coils.

Download system design schematic

• 900 kW BAXI PLANT, MLC BUILDING, MARTIN PLACE SYNDEY
Updating an existing building to met the new green star legislation has never been easier.
The office block was separated from the retail tenancy level 26 down.
6 x Baxi 150kW Power HT models were transported to level 26 using the buildings lifts and hand trolleys.
All 6 boilers are controlled with a Baxi sequence controller linked with the BMS system.
Boilers modulate from 900kW down to 40kW.

Download system design schematic

• 900kW BAXI PLANT, BALLARAT AQUATIC CENTRE
6 x Baxi 150 kW Power HT models replaced, one atmospheric boiler. All 6 boilers are controlled with a Baxi sequence controller linked withthe BMS system. Boilers modulate from 900kW down to 40kW.

Download system design schematic.

• 600kW BAXI PLANT, ORMOND COLLEGE PARKVILLE
4 x Baxi 150 kW Power HT models replaced, one atmospheric boiler. All 4 boilers are controlled with a Baxi sequencecontroller linked with an outdoor sensor. Boilers modulate from 600kW down to 40kW.

Download system design schematic

• 360kW BAXI PLANT, MANSFIELD HOSPITAL
3 x Baxi 120 kW Power HT models replaced, two gun burner cast iron. All 3 boilers are controlled with a Baxi sequencecontroller linked with an outdoor sensor. Boilers modulate from 360kW down to 39kW.

Download system design schematic